@cfg83@Kidsandliz Yeah, the first misinformation panel says “suction” in big letters, and then farther on they say “adhesive”. I seem to recall that we’ve run across this kind of terminological absurdity before.
@Kidsandliz@werehatrack Yes, if you want to deflux a frento-fog of terminological absurdity, then you need to integrate a conjunction function encabulator …
@cfg83@Kidsandliz@werehatrack Don’t have a microscope handy to confirm if there are actual nano suction cups, but I have had 2 on my work desk for a few months now and they seem to work fine. It takes a good bit of force to disengage the phone from the magsafe mount and the base doesn’t budge at all. I just tried peeling one off using the tab after unlocking the base and it came off without leaving any residue. So far, I’ve been satisfied with them for the price.
@elobdell Closer examination seems to indicate that they do not actually employ suction, but rather adhesive. So perhaps they suck because they don’t suck?
/showme Cat in Victorian business suit with monocle is saying, “Good day, sir squirrel, but I will not imbibe” to squirrel street vendor that is selling Statik HyperMount Gen 2 Magnetic Phone Holder.
In the image, it says that the mounts will work on surfaces that a suction mount is just never going to stick to, like brick. Something tells me that we may be looking at the reason these are here on Meh; specs written by Marketing. The suction might work in the usual way on exceptionally clean and imperfection-free at-least-nearly-flat glass and other comparable surfaces, but drywall, textured dashboards, nearly any wood, and brick will be Right Out.
And then delving further, it looks like they tried to solve the problem of loss of suction by making the cup permanently-sticky like the traction pads that used to be poplar as a way to keep a phone from sliding around on a dashboard. Of course, that was inevitably going to cause the sticky surface to pick up all the dust and stuff on the mounting surface, leading to it making a terrible seal that eliminates the utility of the suction. Two semi-good ideas that could have been expected to work worse together.
Maybe the phone has the picture of what she’s trying to look like? Or she’s following [her own?] how to video? It does look slightly different than what’s she doing, but it also looks like she might be holding two brushes on the phone?
Surely she hasn’t stuck a mount on her mirror to mirror herself on her phone.
They give you 3 to make you feel like you’re getting a deal. Otherwise these mounts suck. The suction is great, but it will not hold my phone up after the first couple of uses.
I’m so tempted cuz right now I’m using a dumb air vent magnet dealy which I hate. Anyone have a better recommendation for another product out there? I have a textured dash/surface in my car but car is so old I don’t mind adhesing something to it.
It’s basically a suction cup made of a soft, conforming adhesive pad. That part is no problem at all. Should hold to most surfaces, will conform to texture when you press it on.
The magnet is also no problem, it’s got plenty of force to hold any phone, probably tablets too.
The possible weak point is the joint, that seems to get loose, and may not hold the phone angle you want without retightening it with the included allen key. Not a problem where I mounted it, due to space issues I mounted it on the top of the dash, and that joint is resting at 90 degrees so I can see the phone.
Specs
Product: 3-Pack: Statik HyperMount Gen 2 Magnetic Phone Holders
Model: PUP-0660-V2-BLK-3PK
Condition: New
What’s Included?
Price Comparison
$27.99 at Amazon
$71.99 at Statik
Warranty
90 days
Estimated Delivery
Monday, Nov 30 - Tuesday, Dec 1
So since it requires up to 66 pounds of force to remove the phone I can use this for strength training as I am trying to wrestle the phone off?
@Kidsandliz 66 pounds?!?!?!?
NanoSuction adhesive seems kind of weak to me.
@cfg83 @Kidsandliz Yeah, the first misinformation panel says “suction” in big letters, and then farther on they say “adhesive”. I seem to recall that we’ve run across this kind of terminological absurdity before.
@Kidsandliz @werehatrack Yes, if you want to deflux a frento-fog of terminological absurdity, then you need to integrate a conjunction function encabulator …
@cfg83 @Kidsandliz @werehatrack
What? No mention of the splay flex brace columns vent dampers or the 12 husk nuts? Amateurs!
@cfg83 @Kidsandliz @werehatrack Don’t have a microscope handy to confirm if there are actual nano suction cups, but I have had 2 on my work desk for a few months now and they seem to work fine. It takes a good bit of force to disengage the phone from the magsafe mount and the base doesn’t budge at all. I just tried peeling one off using the tab after unlocking the base and it came off without leaving any residue. So far, I’ve been satisfied with them for the price.
KuoH
@kuoh What kind of desk surface you working with? Totally smooth or like a wood grain/textured?
@Kidsandliz @kuoh @werehatrack That’s good to know. From a design POV, I like their 1/2 soda can cylinder size. Reminds me of …
@highonpez It has the appearance of wood grain, but is essentially a smooth surface, probably some kind of laminate.
KuoH
@Kidsandliz Probably just Alien Tape™.
Hefty 2.6 rating on Amazon.
@MarkML Wimpy wimpy wimpy?
@MarkML @Sorry_Nothing
HEF TEE!! HEF TEE!!
These mounts suck, it they work right.
@werehatrack Amazon reviews and ratings suggest they do not suck. And they do not suck pretty badly, it seems.
@elobdell Closer examination seems to indicate that they do not actually employ suction, but rather adhesive. So perhaps they suck because they don’t suck?
I will not be purchasing this item, good day.
@Sorry_Nothing Me neither.
@Sorry_Nothing @werehatrack Harumph!
/showme Cat in Victorian business suit with monocle is saying, “Good day, sir squirrel, but I will not imbibe” to squirrel street vendor that is selling Statik HyperMount Gen 2 Magnetic Phone Holder.
@cfg83 Here’s the image you requested for “Cat in Victorian business suit with monocle is saying, Good day, sir squirrel, but I will not imb…”
@mediocrebot So very precise, Sir Cat!
In the image, it says that the mounts will work on surfaces that a suction mount is just never going to stick to, like brick. Something tells me that we may be looking at the reason these are here on Meh; specs written by Marketing. The suction might work in the usual way on exceptionally clean and imperfection-free at-least-nearly-flat glass and other comparable surfaces, but drywall, textured dashboards, nearly any wood, and brick will be Right Out.
@werehatrack Aha! In a smaller font, the admission is made; these aren’t suction mounts at all, they use adhesive. Pass even harder.
And then delving further, it looks like they tried to solve the problem of loss of suction by making the cup permanently-sticky like the traction pads that used to be poplar as a way to keep a phone from sliding around on a dashboard. Of course, that was inevitably going to cause the sticky surface to pick up all the dust and stuff on the mounting surface, leading to it making a terrible seal that eliminates the utility of the suction. Two semi-good ideas that could have been expected to work worse together.
Omg wow. Add shipping it’s same price as amazon…
Omg wow. Add shipping it’s same price as amazon…
Lame meh. Lame.
And on the Gta6 drop night… Shame shame.
@user18673308
It’s amazing that meh isn’t honoring the GTA franchise. Meh used to be cool.
Someone explain what’s going on here.
Maybe the phone has the picture of what she’s trying to look like? Or she’s following [her own?] how to video? It does look slightly different than what’s she doing, but it also looks like she might be holding two brushes on the phone?

Surely she hasn’t stuck a mount on her mirror to mirror herself on her phone.
Kids these days…
@stinks rampant consumerism
@stinks Yes, it is mounted on a mirror. Mirror surface sounds ideal for these.
@cfg83 @stinks
/showme an infinity mirror using Statik HyperMounts.
@therealjrn Here’s the image you requested for “an infinity mirror using Statik HyperMounts.”
@mediocrebot @therealjrn
They give you 3 to make you feel like you’re getting a deal. Otherwise these mounts suck. The suction is great, but it will not hold my phone up after the first couple of uses.
Even more meh than usual! IRKsome, even.
Bought 3 of these for something like $45 direct from mfr. Each is still in its box. Will be re-gifting for holidays, they are not useful.
@boberino don’t like your family, huh?
@boberino same! They were supposed to be fantastic! Super strong! But not even close! A piece of junk.
Will it suck out fat?
looks like trash, and such large portions! Pass
I had one of the three that wouldn’t hold. The suction is good but the mechanism to hold it upright sucked.
I’m so tempted cuz right now I’m using a dumb air vent magnet dealy which I hate. Anyone have a better recommendation for another product out there? I have a textured dash/surface in my car but car is so old I don’t mind adhesing something to it.
It’s basically a suction cup made of a soft, conforming adhesive pad. That part is no problem at all. Should hold to most surfaces, will conform to texture when you press it on.
The magnet is also no problem, it’s got plenty of force to hold any phone, probably tablets too.
The possible weak point is the joint, that seems to get loose, and may not hold the phone angle you want without retightening it with the included allen key. Not a problem where I mounted it, due to space issues I mounted it on the top of the dash, and that joint is resting at 90 degrees so I can see the phone.